As an Amazon Associate we earn from qualifying purchases

Announcement

Collapse
No announcement yet.

Fittings for split bed required

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fittings for split bed required

    Good morning/ aft all,

    I am trying to locate a means of locating/fitting and locking 2 panels (to form a bed) into position width ways,
    I have seen a latch with locating pin and a sliding latch to lock the 2 panels together securely and cannot remember (age related) where,
    I have been searching now for a few days with no results of what they are technically called either,

    The panels will be supported along the length and must be easy to locate using these latches and fit together securely after a good night in the pub
    Any help would be appreciated,
    If mistakes are the foundation of understanding, i have firm foundation,Underpinned by much in the way of I don't want to do that again

    #2
    ok here we go cant draw but should give you my idea
    Attached Files

    Comment


      #3
      that loks like the bits that hold a Divan bed base together .or is that the lack of drawing skills MOS xx

      Comment


        #4
        Originally posted by AGING HIPPY View Post
        ok here we go cant draw but should give you my idea
        Cheers
        unfortunately the sides of the bed panel are 1/4 rounded
        so this will not work,
        From what I can remember, one part was angled bracket with a cone/spigot on was fitted to the wall or supporting structure, then a metal plate with a hole to match the spigot was engaged, a sliding catch slid into position locking the assembly together,
        At the moment I have used two jointing biscuits slotted in one panel, and a steel pin dropped in to lock them together, works but a lashup
        If I misplace the Pins i'm sleeping on floor
        Last edited by chocoholic; 14-07-2011, 20:19.
        If mistakes are the foundation of understanding, i have firm foundation,Underpinned by much in the way of I don't want to do that again

        Comment


          #5
          ok round two and three
          Attached Files
          Last edited by AGING HIPPY; 15-07-2011, 22:42.

          Comment


            #6
            Fixing

            Hi,
            Great minds think alike M8
            The system you came up with is similar to what I have done, Only mine is in the vertical plane, not the horizontal as you show,
            Well I have made a spare set of pins just in case they go missing
            Cheers for the input,
            still gonna search for them fittings tho,
            pete
            If mistakes are the foundation of understanding, i have firm foundation,Underpinned by much in the way of I don't want to do that again

            Comment


              #7
              Any of these any use?

              http://delivered2you.co.uk/epages/es...ories/16/01/08

              Comment


                #8
                Hi,
                Thanks for the link jayjay,
                Not quite whats required but some good ideas
                If mistakes are the foundation of understanding, i have firm foundation,Underpinned by much in the way of I don't want to do that again

                Comment

                320x50 mobile only under posts reg users

                Collapse

                728x90 google ad under posts desktop only reg users

                Collapse
                Working...
                X