As an Amazon Associate we earn from qualifying purchases

Announcement

Collapse
No announcement yet.

C15 Romahome Tow Bar

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ant
    replied
    Hi Ecobezhig.
    Most of the towbars made for the C15 utilise the rear crossmember of the original chassis and then down the chassis legs on either side, that sorts the pulling strength, the nose weight is a bit harder to cater for, many bolt through the rear floor of the Romahome pod and plate it inside. You're a brave man wanting to use the steady fixings, in my experience the captive bolt that Romahome use to attach the rear steadies nearly always turns when you try and undo the nut and anyway the steady was fitted with the force pushing it up in mind, the tow bar would be pulling against the intended direction of force.
    Ant

    Leave a comment:


  • RRH
    started a topic C15 Romahome Tow Bar

    C15 Romahome Tow Bar

    Hi Ant,

    I have looked at the rear underside of my c15 with the thoughts of making a towbar. I see no reason why I could not utilize the 4 corner steady mounts for attaching a one piece tow bar assembly.

    I am a welder by trade and make all sorts of one offs. I think that towing a caravan would be unwise but a small trailer certainly.

    I would welcome your advice here.

    regards
    ecobezhig

320x50 mobile only under posts reg users

Collapse

728x90 google ad under posts desktop only reg users

Collapse
Working...
X