As an Amazon Associate we earn from qualifying purchases

Announcement

Collapse
No announcement yet.

water problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    water problem

    I have just filled the two water tanks on the Dimension-then when checking if the toilet flush was working noticed that some water had collected in the base of the toilet/shower unit.

    Any comments welcome

    Ian

    #2
    Hi Ian.
    Providing care was taken to leave the loo tank fairly empty over the cold winter the tank is unlikely to be damaged. The most common cause is water from the filler neck seal. I say seal, that's the problem, there is no real seal around the filler neck as it enters the top of the tank, so if you either over fill the tank or fill it with a fast running hose you can get some leakage which appears in the shower tray eventually.
    Ant

    Comment


      #3
      water problem

      Thanks Ant

      You were right it was the small rubber plug not tight enough and the water spilled around the cassette and then into the shower tray.

      Many thanks

      Ian

      Comment

      320x50 mobile only under posts reg users

      Collapse

      728x90 google ad under posts desktop only reg users

      Collapse
      Working...
      X