As an Amazon Associate we earn from qualifying purchases

Announcement

Collapse
No announcement yet.

Plastic body moulding insert?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Twolitre
    replied
    Originally posted by glenw View Post
    You could try www.sealsdirect.co.uk jajjay found them very helpful a few years ago and on her recommendation we also used them to source a trim to cover rivet heads around our old Motorhome door.
    Wow, just clicked the link.
    Best source of seals etc. I have ever seen. I have completed lots of "projects" in the past and wasted much time locating seals and trims to complete the Job.
    The link is now saved in "Favorites" (windows spelling not mine), just in case.
    Jim.
    Just a tip from experience: Always use the maximum length of filler or seal you can squeeze in. It will ALWAYS shrink over time and try to leave a gap somewhere.
    Last edited by Twolitre; 02-06-2011, 13:09.

    Leave a comment:


  • Nu Venture, Cleethorpes
    replied
    eriba

    Hi paul, ive just discarded a bin liner full,Pants i no you could have had it free!! I owned my eriba car and rebuilt it almost over 4 years, the trim in question tho is easy enough to source,Try Magnum mobiles, Grimsby,Ask to speke to kenny carter, tho there are loads of different profiles, he will have one thats fits, i put maroon back in mine there were miles of it, i put mine in a bucket of hot soapy water as it needs to be a good tight fit, and then slipped it in

    Leave a comment:


  • Biker Paul
    replied
    Thanks folks, they have the very stuff.Allsorted!!:so happy:

    Leave a comment:


  • pamsicle
    replied
    seals

    I was just going to suggest the same people. I got trim for around my caravan front window from them. They are good.

    Pam

    Leave a comment:


  • glenw
    replied
    You could try www.sealsdirect.co.uk jajjay found them very helpful a few years ago and on her recommendation we also used them to source a trim to cover rivet heads around our old Motorhome door.

    Leave a comment:


  • Twolitre
    replied
    When I was in the motor trade, where we met non standard vehicle conversions by unknown makers, we used to source the trim sections and channel required from specialist coach/body builders.
    If they had not got it they could usually source it. Generally though, special orders meant buying a lot more than required.
    Check your Yellow Pages or the 'net for Coach & body builders and try them.
    Jim.

    Leave a comment:


  • Biker Paul
    started a topic Plastic body moulding insert?

    Plastic body moulding insert?

    Does anyone know where I can buy the "V" section plastic infill strip for the alloy channel on my Eriba camper, it is a fairly common sort of moulding that expands and grips in the channel where the screw heads are. Mine over the years has become brittle and shrunk pulling out at the curved corners and looking unsightly so I need to replace about 4 Mtrs of this stuff.

320x50 mobile only under posts reg users

Collapse

728x90 google ad under posts desktop only reg users

Collapse
Working...
X